foam glass from mechanoactivated zeolite

  • Foam Glass from Mechanoactivated ZeolitePoor Rock

    15/01/2014  Foam Glass from Mechanoactivated ZeolitePoor Rock L K Kazantseva 1, T S Yusupov 1, T Z Lygina 2, L G Shumskaya 1 D S Tsyplakov 2 Glass and Ceramics volume 70, pages 360–364 (2014)Cite this article 160 Accesses 6 Citations Metrics details The possibility of making foam glass from zeolitepoor rock is examined Mechanoactivation of the crushed rock or

    Cited by: 6
  • Foam Glass from Mechanoactivated ZeolitePoor Rock

    The possibility of making foam glass from zeolitepoor rock is examined Mechanoactivation of the crushed rock or the addition of opoka rock to alkaline zeolitecontaining compositions significantly increases the foaming intensity In addition the macro and microporous structure of the foam material obtained from rock conventionally crushed in a rod mill differs from that of the foam material

  • Foam Glass from Mechanoactivated ZeolitePoor Rock

    Download Citation Foam Glass from Mechanoactivated ZeolitePoor Rock The possibility of making foam glass from zeolitepoor rock is examined Mechanoactivation of the crushed rock or the

  • Particulars of Foam Glass Manufacture from ZeoliteAlkali

    10/11/2013  This indicates that on the whole the foam glass fabricated from carbonated zeolitealkali batch has a closed system of pores Fig 6 SEM image of macro and microporous systems of foam glass made from a carbonated zeolitealkali composition Full size image Notes 1 Here and below the content by weight, wt% References 1 L K Kazantseva, I A Belitskii, S N Dement’ev, et al

    Cited by: 8
  • Cellular glass ceramic materials on the basis of zeolitic

    01/11/2012  Using the recommended quantities for the production of foam glass as a guideline, Granulated foam zeolite meets the requirements and can be used, as well as expanded clay, as lightweight aggregates for concrete and as heat insulating filling 5 Summary and conclusions The investigations described in this article have shown that melting of a raw mix on the basis of zeolite

    Cited by: 3
  • Granulated foam glass–ceramic material from zeolitic rocks

    01/05/2008  Expanded zeolite with alkali content in its phase composition is a foam glass–ceramic material with 386% amorphous part and crystalline part, this gives higher strength level in comparison with sponge glassCharacteristics of foam glass–ceramic material from zeolitic rock permit the use of this material as lightweight aggregate and

    Cited by: 17
  • Granulated foam glass–ceramic material from zeolitic

    01/05/2008  Expanded zeolite with alkali content in its phase composition is a foam glass–ceramic material with 386% amorphous part and crystalline part, this gives higher strength level in comparison with sponge glassCharacteristics of foam glass–ceramic material from zeolitic rock permit the use of this material as lightweight aggregate and

  • Cellular glass ceramic materials on the basis of zeolitic

    01/11/2012  Using the recommended quantities for the production of foam glass as a guideline, Granulated foam zeolite meets the requirements and can be used, as well as expanded clay, as lightweight aggregates for concrete and as heat insulating filling 5 Summary and conclusions The investigations described in this article have shown that melting of a raw mix on the basis of zeolite

  • (PDF) Formation of a PoreForming Gas Source by Wetting

    Foam Glass from Mechanoactivated ZeolitePoor Rock Article Jan 2014; GLASS CERAM+; Lidia K Kazantseva ; T S Yusupov; Talia Z Lygina; Dmitry S Tsyplakov; The possibility of making foam glass

  • Granulated foam glass–ceramic material from zeolitic

    Expanded zeolite with alkali content is a material of glass–ceramic composition with amorphous part of 386% and crystalline part of 614% that gives higher strength in comparison with sponge glass Abstract The objective of this research work was to investigate the production of granulated foam glass–ceramic material from zeolitic rocks The investigations have shown that grinding raw

  • Formation of a porous structure in a granulated glass

    The possibility of producing foam glass ceramics from zeolitebearing rocks is investigated It is established that milling the zeolitebearing material to a particle size below 050 mm and adding 138% alkali ensures at the firing temperature of 850°C the production of a material of bulk density 340 kg/m 3, strength 16 MPa, and water absorption 13%

  • Controllable synthesis of ZSM5 coatings on SiC foam

    01/11/2012  The porous supports used for growing zeolite coatings can be glass , Al 2 O 3 After hydrothermal treatments, the zeolite/SiC foam composite and ZSM5 powders were washed thoroughly with hot water and dried at 373 K in air, and subsequently calcined at 823 K for 6 h to remove the organics from the zeolite framework The obtained sodium containing zeolite was finally converted to

  • Optimization of porous heatinsulating ceramics

    01/12/2016  1 Introduction Although foam glass is known to be the most reliable and ecologically clean among thermalinsulating building materials, its manufacturing cannot be recognized as an energysaving technology because of double heating treatment used in the process: first for raw glass preparation at 1450–1500 °C, and second for foaming of milled raw glass mixed with gasifier at 800–900 °C ,

  • Production of Foam Glass Materials from Silicate Raw

    The ways of external protection of oil pipelines, their advantages and disadvantages were described A method for protecting pipes using foam glass products, based on local raw materials, was proposed The powder technology of the batch preparation and the hydration mechanism of foaming through the interaction of alkali and silica were chosen for this study, based on the existing methods of

  • Sound absorption characteristics of a hightemperature

    01/09/2012  Secondly, zeolite powder and pore former (polymer foam particles) are mixed well at a certain percentage by adding some water The mixtures are suppressed into the mold, yielding a compact composed of zeolite and polymer foam particles The wet cylindrical compacts are then placed into the thermotank for drying Thirdly, the dried compacts are put into the muffle furnace and sintered at 1130

  • Rod Mill Zeolite Impact myhealthcoachpl

    Foam Glass from Mechanoactivated ZeolitePoor Rock Basics of Rolling of Steel IspatGuru Grinding machines zeolite Zeolite Cost, You Can Buy Various High Quality Zeolite Cost Products from Global Zeolite Cost Suppliers and Zeolite Cost Natural zeolite wet grinding News Blogs Related News Local Coal Slurry Dryer Machine Design And Capacity Calculation Copper Ore Processing Slurry

  • Granulated foam glass–ceramic material from zeolitic

    01/05/2008  Expanded zeolite with alkali content in its phase composition is a foam glass–ceramic material with 386% amorphous part and crystalline part, this gives higher strength level in comparison with sponge glassCharacteristics of foam glass–ceramic material from zeolitic rock permit the use of this material as lightweight aggregate and

  • Granulated foam glass–ceramic material from zeolitic

    Expanded zeolite with alkali content is a material of glass–ceramic composition with amorphous part of 386% and crystalline part of 614% that gives higher strength in comparison with sponge glass Abstract The objective of this research work was to investigate the production of granulated foam glass–ceramic material from zeolitic rocks The investigations have shown that grinding raw

  • Formation of a porous structure in a granulated glass

    The possibility of producing foam glass ceramics from zeolitebearing rocks is investigated It is established that milling the zeolitebearing material to a particle size below 050 mm and adding 138% alkali ensures at the firing temperature of 850°C the production of a material of bulk density 340 kg/m 3, strength 16 MPa, and water absorption 13%

  • Controllable synthesis of ZSM5 coatings on SiC foam

    01/11/2012  The porous supports used for growing zeolite coatings can be glass , Al 2 O 3 After hydrothermal treatments, the zeolite/SiC foam composite and ZSM5 powders were washed thoroughly with hot water and dried at 373 K in air, and subsequently calcined at 823 K for 6 h to remove the organics from the zeolite framework The obtained sodium containing zeolite was finally converted to

  • Optimization of porous heatinsulating ceramics

    01/12/2016  1 Introduction Although foam glass is known to be the most reliable and ecologically clean among thermalinsulating building materials, its manufacturing cannot be recognized as an energysaving technology because of double heating treatment used in the process: first for raw glass preparation at 1450–1500 °C, and second for foaming of milled raw glass mixed with gasifier at 800–900 °C ,

  • ZeoliteCoated Mesostructured Cellular Silica Foams

    ZSM5 and NaYcoated MCF materials as new acid catalysts for conversion of bulky molecules were prepared by the coating procedure using diluted clear zeolite gel solutions The resulting materials have high acidity and improved steam stability as compared to that of the corresponding MCF aluminosilica This could be due to the zeolitic nature and relative hydrophobicity of the mesopore surface

  • Production of Foam Glass Materials from Silicate Raw

    The ways of external protection of oil pipelines, their advantages and disadvantages were described A method for protecting pipes using foam glass products, based on local raw materials, was proposed The powder technology of the batch preparation and the hydration mechanism of foaming through the interaction of alkali and silica were chosen for this study, based on the existing methods of

  • Sound absorption characteristics of a hightemperature

    01/09/2012  Secondly, zeolite powder and pore former (polymer foam particles) are mixed well at a certain percentage by adding some water The mixtures are suppressed into the mold, yielding a compact composed of zeolite and polymer foam particles The wet cylindrical compacts are then placed into the thermotank for drying Thirdly, the dried compacts are put into the muffle furnace and sintered at 1130

  • Sound Absorbing Foam Glass – foamglass

    12/06/2015  Published by: macrinayu Foam Glass is made from broken glass,foaming agent ,foaming promoting agent and etc,which its were broken into pieces and mixing uniformity together,and which its can be made into inorganic nonmetallic foam glass materialsThe opening bubble of sound absorbing foam glass is more than 50 percent The closedcell bubble of Insulation foam glass is more than 75

  • Processes of the Foaming Mixture’ Components

    The prospects for the use of foam glass in construction were described The modern compositions of foaming mixtures for foam glass synthesis were considered Compositions for studying the influence of the foaming mixture components on the formation of foam glass porous structure were developed, their internal structure and properties were studied

  • Controllable synthesis of ZSM5 coatings on SiC foam

    01/11/2012  The porous supports used for growing zeolite coatings can be glass , Al 2 O 3 After hydrothermal treatments, the zeolite/SiC foam composite and ZSM5 powders were washed thoroughly with hot water and dried at 373 K in air, and subsequently calcined at 823 K for 6 h to remove the organics from the zeolite framework The obtained sodium containing zeolite was finally converted to

  • ENVIRONMENTAL IMPACT OF FOAMED GLASS PREPARED FROM

    Aim: synthesis of commercially comparable Foam glass (FG) material from powder mixture of sewage sludge ash (SSA), recycled bottle glass culet (G), and carbonate foaming agent (F), determination of FG environmental impact SSA oxide wt% SiO 2 4079 CaO 1763 Al 2 O 3 110 Fe 2 O 3 535 MgO 343 Na 2 O 042 other 2138 G oxide wt% SiO 2 843 CaO

  • Junpei Ye, Muhammad Zubair, Siqi Wang, Yajing Cai, Panyue

    adsorbent was rich in zeolite content, which had a huge specific surface area and porous structure The adsorption capacity of (2018) prepared a highly insulating foam glass using FA and recycled glass The optimal parameters were 333%–433% FA, 05% SiC, and 9%–11% Na 2 CO 3, and firing temperature of 865–915°C for 15min residence time at the peak temperature Compared with

  • ZeoliteCoated Mesostructured Cellular Silica Foams

    ZSM5 and NaYcoated MCF materials as new acid catalysts for conversion of bulky molecules were prepared by the coating procedure using diluted clear zeolite gel solutions The resulting materials have high acidity and improved steam stability as compared to that of the corresponding MCF aluminosilica This could be due to the zeolitic nature and relative hydrophobicity of the mesopore surface

  • Structured [email protected] Zeolite supported on SiC Foam Catalysts

    2 methanation, in situ characterization, silicon carbide (SiC) foam, structured catalyst, zeolite Received: 19 December 2019 Revised: 3 July 2020 Accepted: 3 August 2020 DOI: 101002/aic17007 This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited

  • Environmental impact of foamed glass prepared from

    Management of waste materials for sustainable development imply their recycling and reuse In this work the foam glass (FG) was prepared from powder mixture of waste materials: sewage sludge ash (SSA), recycled bottle glass culet, and carbonate foaming agent through onestep thermal process at temperatures up to 850°C Prepared FG, with wollastonite as a major mineral phase, had open and

  • Processes of the Foaming Mixture’ Components

    The prospects for the use of foam glass in construction were described The modern compositions of foaming mixtures for foam glass synthesis were considered Compositions for studying the influence of the foaming mixture components on the formation of foam glass porous structure were developed, their internal structure and properties were studied

  • Sound Absorbing Foam Glass – foamglass

    12/06/2015  Published by: macrinayu Foam Glass is made from broken glass,foaming agent ,foaming promoting agent and etc,which its were broken into pieces and mixing uniformity together,and which its can be made into inorganic nonmetallic foam glass materialsThe opening bubble of sound absorbing foam glass is more than 50 percent The closedcell bubble of Insulation foam glass is more than 75

  • Molecular Sieves For Polyurethane Industry JALON

    Our activated zeolite powders are an efficient moisture prevention solution that works on a molecular level The powder blocks the formation of bubbles and foam within the area by stopping the reaction of the isocyanate group and free water Pores within the activated zeolite powders also rapidly absorb almost all water molecules across a wide area

  • Zeolite in the production of cement, concrete, foam and

    Zeolite in the production of cement, concrete, foam and aerated concrete Since ancient times, natural zeolites have been used in construction, mainly as a piece of stone Back in the 70's the majority of mined in Western Europezeolites were used as building stone, insulating materials of low density and in the process of the production of pozzolatic cement